Renegade Public Forums
C&C: Renegade --> Dying since 2003™, resurrected in 2024!
Home » Renegade Discussions » Mod Forum » repairing the guard towers
repairing the guard towers [message #23494] Tue, 03 June 2003 07:48 Go to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
when repairing the guard towers(wooden ones)....alot of black smoke was emmiting from it.....i checked the w3d model for emmiters and it wasnt there....where can i remove this from the GT or th repair gun...is it the texture that is conflicting?

Report message to a moderator

repairing the guard towers [message #23495] Tue, 03 June 2003 07:49 Go to previous messageGo to next message
[REHT]Spirit is currently offline  [REHT]Spirit
Messages: 277
Registered: April 2003
Karma: 0
Recruit
It's the texture type for the wood parts.

Report message to a moderator

repairing the guard towers [message #23498] Tue, 03 June 2003 08:33 Go to previous messageGo to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
the texture type cannot be modified in the .W3D viewer?....im pretty sure im going to have to retexture the whole model which the only prob i see is the gun.

After I retexture I'll post up the new model on mod.x

Report message to a moderator

repairing the guard towers [message #23499] Tue, 03 June 2003 08:43 Go to previous messageGo to next message
[REHT]Spirit is currently offline  [REHT]Spirit
Messages: 277
Registered: April 2003
Karma: 0
Recruit
Ok, in the material editor thingy where you tell it what texture(s) to use, in the very first tab which you see when you open it there's a pull down box with the material type (tiberium, wood, etc), that's what I'm talking about. Can't change it in the W3D Viewer.

Report message to a moderator

repairing the guard towers [message #23500] Tue, 03 June 2003 09:24 Go to previous messageGo to next message
Aircraftkiller is currently offline  Aircraftkiller
Messages: 8213
Registered: February 2003
Karma: 1
General (5 Stars)
Leave it alone. It's supposed to be made of wood. It'll be stupid to turn a wooden Guard Tower into a metal\concrete Guard Tower because you don't like the emitter the repair gun creates when hitting the wood. Shoot the underside of it then FFS, there's no need to ruin the model.

Report message to a moderator

repairing the guard towers [message #23503] Tue, 03 June 2003 09:43 Go to previous messageGo to next message
Ferhago is currently offline  Ferhago
Messages: 1014
Registered: March 2003
Karma: 0
General (1 Star)
Ack is right.

Or the simple solution is to turn down your detail settings

Report message to a moderator

repairing the guard towers [message #23508] Tue, 03 June 2003 10:22 Go to previous messageGo to next message
JRPereira is currently offline  JRPereira
Messages: 233
Registered: April 2003
Location: Earth
Karma: 0
Recruit
or you could modify the emitter

Report message to a moderator

repairing the guard towers [message #23510] Tue, 03 June 2003 10:36 Go to previous messageGo to next message
OrcaPilot26 is currently offline  OrcaPilot26
Messages: 394
Registered: February 2003
Karma: 0
Commander
I never really liked that guard tower model, they could've at least used some better wood textures.

http://nova.deadlyfear.com/uploads/files//sig_orca.jpg
"ALL HAIL THE CHRONOSPHERE AND ITS CHRONOSHIFTY GOODNESS" -Aircraftkiller

Report message to a moderator

repairing the guard towers [message #23555] Tue, 03 June 2003 19:03 Go to previous messageGo to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
Aircraftkiller

Leave it alone. It's supposed to be made of wood. It'll be stupid to turn a wooden Guard Tower into a metal\concrete Guard Tower because you don't like the emitter the repair gun creates when hitting the wood. Shoot the underside of it then FFS, there's no need to ruin the model.


Umm if you habve ever noticed the FPS drop to about 1 if you are repairing them up close.

I just want to set the collision to default.

Report message to a moderator

repairing the guard towers [message #23557] Tue, 03 June 2003 19:06 Go to previous messageGo to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
JRPereira

or you could modify the emitter


I didnt see any emmiter's in the W#D veiwer for the model.

I think it's set to a wood coillison that generates black smoke when hit with the repair gun


ferhago

Or the simple solution is to turn down your detail settings


Why ruin the rest of the maps detail for a simple problem that can be fixed.

Report message to a moderator

repairing the guard towers [message #23657] Wed, 04 June 2003 18:28 Go to previous messageGo to next message
maytridy is currently offline  maytridy
Messages: 1371
Registered: February 2003
Location: New York, USA
Karma: 0
General (1 Star)
Can't you just change the material type, but keep the same texture?

Visit www.mwbhd.com

Report message to a moderator

repairing the guard towers [message #23699] Thu, 05 June 2003 02:15 Go to previous messageGo to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
yep

Problem is i'd have to retexture it all in ren-x and then export it....its no big deal,but im not sure if the gun is going to be hard to texture.

It's prob an easy .dds that is allready lined up like most of the vehilces.

I just wanted to know if there was a setting in commando or W3d to change the repair gun effect on wood.

Report message to a moderator

repairing the guard towers [message #23702] Thu, 05 June 2003 03:17 Go to previous messageGo to next message
Falconxl is currently offline  Falconxl
Messages: 172
Registered: February 2003
Karma: 0
Recruit
I wouldn't mess with it. Did you ever notice the MobArt does the same thing, it did that as long as I can remember. You might just wind up making things a lot worse.

http://www.n00bstories.com/image.fetch.php?id=1008327832
Moderator for the pits Renegade Server

Original Ren forum info:
Falconxl
Commander
Member # 4776
Posts: 615 | Registered: Dec 2001 |
Phase 3 Beta Testor

Report message to a moderator

repairing the guard towers [message #23717] Thu, 05 June 2003 07:35 Go to previous messageGo to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
Hmmm....i noticed that it uses the mobile art as one of it's property's...I might try and fiddle with those settings....I'll let you guys know if i can fix it thru that way.....If not i'll remodel one.

Report message to a moderator

repairing the guard towers [message #23819] Thu, 05 June 2003 17:53 Go to previous message
Madtone is currently offline  Madtone
Messages: 713
Registered: February 2003
Location: United Kingdom
Karma: 0
Colonel
if you want you can use my Guard Tower model i have on ModX

Guard Tower:
http://modx.the-pitts.net/showthread.php?s=&threadid=232&highlight=Guard+Tower

Just put a model of a gun on it, you can use one of my gun models on ModX if you wish, or use one of the WW gun models.

Also you may edit this model if you wish

http://www.freeflow-solutions.com/sigs/ffsig.gif

Report message to a moderator

Previous Topic: RenX Help ASAP
Next Topic: "My_First_Map" Tutorial
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jan 09 04:59:03 MST 2026

Total time taken to generate the page: 0.01041 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 420.69.
Copyright ©2001-2023 FUDforum Bulletin Board Software