Renegade Public Forums
C&C: Renegade --> Dying since 2003™, resurrected in 2024!
Home » Renegade Discussions » Mod Forum » XCC Mixer problems
XCC Mixer problems [message #51662] Thu, 16 October 2003 19:01 Go to next message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

I run the XCC Mixer, and the only game for it to check is Renegade, everytime I run it after 5 minutes of waiting, I either get a runtime error, this program as aked to terminate in an unusual way and will be shut down BLAH BLAH BLAH, or Your memory is to low BLAGH BLAGH BLAGH, Me computer has 384 Mg RAM, and I was able to run XCC mixer just fine with 256 Mg RAM I don't get it, what is wrong, I tried it on my brother's computer, and the same exact thing happened. I just want to find out how to fix it, should I cut out all the files except the one I want to look through? I tried that, and it still didn't work, only I didn't get the memory to low error this time, I wanted to make a Renegade Desktop, and can't do it untill I extract a few thing from the Always.dat. PLEASE SOMEBODY HELP! THANK YOU FOR ANY, AND ALL HELP YOU CAN GIVE!

XCC Mixer problems [message #51667] Thu, 16 October 2003 19:11 Go to previous messageGo to next message
kopaka649 is currently offline  kopaka649
Messages: 476
Registered: March 2003
Location: Edmonton, Alberta, Canada
Karma: 0
Commander
i think to disable the scanning, you have to hold shift down when you're starting the program.
XCC Mixer problems [message #51709] Fri, 17 October 2003 11:34 Go to previous messageGo to next message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

OK I will try that. THANK YOU!

XCC Mixer problems [message #51767] Fri, 17 October 2003 16:09 Go to previous messageGo to next message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

Holding shift didn't work it still scanned it. Any other suggestions?

XCC Mixer problems [message #51770] Fri, 17 October 2003 16:14 Go to previous messageGo to next message
Cpo64 is currently offline  Cpo64
Messages: 1246
Registered: February 2003
Location: Powell River, B.C. Canada
Karma: 0
General (1 Star)
9 pound hammer?

-->
XCC Mixer problems [message #51776] Fri, 17 October 2003 17:21 Go to previous messageGo to next message
Jaspah is currently offline  Jaspah
Messages: 1478
Registered: July 2003
Location: Syracuse, New York
Karma: 0
General (1 Star)
Cpo64

9 pound hammer?


Nah, I suggest a sludge hammer. Very Happy
XCC Mixer problems [message #51788] Fri, 17 October 2003 18:55 Go to previous messageGo to next message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

How would a hammer help me? Come on please anybody know of something I can do to make it work.

XCC Mixer problems [message #51796] Fri, 17 October 2003 20:45 Go to previous messageGo to next message
kopaka649 is currently offline  kopaka649
Messages: 476
Registered: March 2003
Location: Edmonton, Alberta, Canada
Karma: 0
Commander
spreegem

Holding shift didn't work it still scanned it. Any other suggestions?

you starting using a shortcut? pressing shift whle opening that seems to work for me. if that doesnt work try getting an older version of xcc mixer 1.22 or 1.23, if you can still find one
XCC Mixer problems [message #51804] Sat, 18 October 2003 00:53 Go to previous messageGo to next message
weetbix is currently offline  weetbix
Messages: 16
Registered: May 2003
Karma: 0
Recruit
I used to have this same problem, but I installed Tiberium Sun to play and then I ran XCC and now I don't have this problem anymore (still have Tiberium Sun on the computer)
XCC Mixer problems [message #51807] Sat, 18 October 2003 03:15 Go to previous messageGo to next message
Titan1x77 is currently offline  Titan1x77
Messages: 1086
Registered: February 2003
Karma: 0
General (1 Star)
press shift and hold it directly After you start the program....timing is critical.

"But if the gameplay sucks, the looks don't matter at all." - Sir Phoenixx

XCC Mixer problems [message #51836] Sat, 18 October 2003 07:15 Go to previous messageGo to next message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

I just got 1.27 and it works perfectly, the previous version I had was 1.20 was it compatible with Renegade?

XCC Mixer problems [message #51858] Sat, 18 October 2003 10:59 Go to previous messageGo to next message
kopaka649 is currently offline  kopaka649
Messages: 476
Registered: March 2003
Location: Edmonton, Alberta, Canada
Karma: 0
Commander
dunno. i think it should be but i could be wrong

From XCC news

XCC Mixer 1.20 10:38:59 16-03-2002

A viewer and a convertor for ReneGade DirectDrawSurface files have been added to XCC Mixer.

XCC Mixer problems [message #51877] Sat, 18 October 2003 12:01 Go to previous messageGo to next message
General Havoc is currently offline  General Havoc
Messages: 1564
Registered: February 2003
Location: Birmingham, England, Unit...
Karma: 0
General (1 Star)
j4S[p

]
Cpo64

9 pound hammer?


Nah, I suggest a sludge hammer. Very Happy


Did you mean Sledge?


Visit my website at http://renhelp.laeubi-soft.de powered by laeubi.de
"SHUT UP AND MOD" - Dante
"ACK is the Simon Cowell of modding" - Ultron10
Scripts.dll Debugger, Map Scripter and Tutorial writer

Computer Science Bsc
Aston University in Birmingham, UK
XCC Mixer problems [message #51912] Sat, 18 October 2003 16:30 Go to previous messageGo to next message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

j4S[p

]
Cpo64

9 pound hammer?


Nah, I suggest a sludge hammer. Very Happy


A hammer made out of Tiberium Sludge would probably work good. Might be bit dangerous. . .


XCC Mixer problems [message #51962] Sun, 19 October 2003 02:26 Go to previous messageGo to next message
laeubi is currently offline  laeubi
Messages: 799
Registered: February 2003
Location: Germany
Karma: 0
Colonel

try deleting the:

* standard file list.dat
* XCC Mixer log.txt

should be result in a clean start.


www.laeubi.de Find Mods, Maps, Tool, Files and More!
< All Tutorials you ever searched for >
< contact me >
"Don't say it is imposible... just find a solution!"
XCC Mixer problems [message #51973] Sun, 19 October 2003 07:00 Go to previous message
spreegem is currently offline  spreegem
Messages: 1755
Registered: March 2003
Location: Ellington, CT
Karma: 0
General (1 Star)

spreegem

I just got 1.27 and it works perfectly.


Previous Topic: disappearing mines
Next Topic: OpFb: Abrams finished
Goto Forum:
  


Current Time: Tue May 07 08:02:40 MST 2024

Total time taken to generate the page: 0.00863 seconds